XGIMI H3S projector ceiling mount tutorial

[Nadia]

XGIMI H3S projector supports ceiling mounted which can save the spacing of your room. Today I am gonna show you how to ceiling mount XGIMI H3S.

Measure before ceiling mount

Because the projector can not easily move the position after ceiling mount, so before installation must accurately measure the position, height that need to reserve.

1. Determine the direction of the XGIMI H3S projector. You can determine the direction of the projector according to the room space, the light situation, the direction of the door, special circumstances, etc.

2. Determine the height of the projector screen according to the screen area and the space of your room.

3. Choose wire according to the wiring plans and the environment.

4. Reserve the space for devices that might be added in the future.

5. Try your projector on the position you have measured, and adjust the position to the best effect. Mark on the position.

 

[Nadia]

Steps of XGIMI H3S ceiling mount

1. Drill holes to install brackets

First drill holes in the marked position on the ceiling using an electric drill with the diameter of the expansion screw. Insert expansion screws (self-tapping screws if the ceiling is made of wood) through the hole at the top of the hanger, then fix the top of the bracket to the ceiling. Using a wrench, install the bracket tube and bottom claw on the top of the bracket.

2. Fix projector

Fit the screw hole on the projector to the screw on the branch pipe, and then adjust the height of the pipe according to the demand.

Tip: Because the projector is off-axis, you do not need to install the projector at the center of the screen.

 

[Markkk_4]

thanks for sharing

 

[58129166]

ceiling mount is good.