Tyler123
Member
Projector is a precision electronic instrument, so its use must have certain taboos, then what taboos are there in the use of the projector? And how can we use a projector to get around that? Here is the details.
1. Don't switch the projector on and off too often
Reason: when the projector is switched on and off every time, it will generate a large impact current, which will impact the internal components of the projector. If the projector is switched on frequently, the components of the projector will be impacted once, and the life of the projector will be greatly reduced if the frequency is too much.
Suggestion: after starting the machine, turn it off or turn it off, turn it on again. There should be an interval of at least 10 minutes. If possible, try to control it more than half an hour.
2. Do not directly disconnect the power supply after the projector is turned off
Reason: the projector in use after a period of time, can have very high quantity of heat inside, especially the projector bulbs, if direct power off after shutdown, can let the projector fan stopped working directly, these could disperse heat that poses a great loss to the projector bulbs and components, greatly reduce the useful service life of the projector.
Suggestion: do not disconnect the power immediately after turning off the projector, wait for the internal fan of the projector to stop before disconnecting the power.
3. Do not use the projector when the voltage is unstable
Reason: the projector is required for the voltage environment, because the projector is very sensitive to current changes when working. The use of the projector in the case of voltage instability, easy to cause damage to the projector motherboard components, more serious cases are caused by the projector bulb burst.
Suggestion: if you really need to use in the case of voltage instability, please use the voltage stabilizer, but it is not recommended to use the projector in this environment.
These are some of the taboos and Suggestions for using projectors. If you have any more Suggestions, please share them in the comments.
1. Don't switch the projector on and off too often
Reason: when the projector is switched on and off every time, it will generate a large impact current, which will impact the internal components of the projector. If the projector is switched on frequently, the components of the projector will be impacted once, and the life of the projector will be greatly reduced if the frequency is too much.
Suggestion: after starting the machine, turn it off or turn it off, turn it on again. There should be an interval of at least 10 minutes. If possible, try to control it more than half an hour.
2. Do not directly disconnect the power supply after the projector is turned off
Reason: the projector in use after a period of time, can have very high quantity of heat inside, especially the projector bulbs, if direct power off after shutdown, can let the projector fan stopped working directly, these could disperse heat that poses a great loss to the projector bulbs and components, greatly reduce the useful service life of the projector.
Suggestion: do not disconnect the power immediately after turning off the projector, wait for the internal fan of the projector to stop before disconnecting the power.
3. Do not use the projector when the voltage is unstable
Reason: the projector is required for the voltage environment, because the projector is very sensitive to current changes when working. The use of the projector in the case of voltage instability, easy to cause damage to the projector motherboard components, more serious cases are caused by the projector bulb burst.
Suggestion: if you really need to use in the case of voltage instability, please use the voltage stabilizer, but it is not recommended to use the projector in this environment.
These are some of the taboos and Suggestions for using projectors. If you have any more Suggestions, please share them in the comments.
