LouiseWinner
Member
Magico decided to add an A5 loudspeakerthat can adapt to a larger listening environment and belongs to A series after successively publishing AAC center and asub active subwoofer in early 2020. Although A5 loudspeaker's shape, height and width are very similar to mingzhentianxia A3, only the depth of A5 loudspeaker is slightly increased by 4 inches, and each weight is increased by more than 60%! One of the reasons for the increasing weight is the sealed sound box made of 6061-T6 aerospace grade aluminum alloy plate with the same quality as the classic q series, which is made of several surfaces brushed and black anode treatment. In addition to the reinforced bracket, the high and middle tone units enjoy a completely independent sealed room to prevent interference.
Familiar 28mm hemispherical beryllium treble
Alon Wolf, the leader and designer of A series speakers, is obviously very dedicated to the unit decision. Let's see the development concept from the million yuan M series to the secret hemispherical treble in the field of 50KHz. The 28mm diaphragm is made of beryllium metal with excellent heat dissipation performance. The rubidium magnet circuit with special structure is also added with new damping materials, which fully meets the strict requirements of high pressure and low distortion regeneration.
Brand new 5 inch sandwich medium with foam material suspension
The A5 loudspeaker will not only create a wider sound diffusion, but also improve the transparency to another level of 5-inch midrange unit. The sandwich shaped vibrating basin formed by special manipulation is the same as the nano graphene GrapheneNano-Tec, which has a tensile strength of 50 times higher than that of carbon steel. As for the suspension part, it is converted to foam material production, which helps to enhance operational response and reduce distortion, so as to make the basin and suspension more ideal. The voice coil is made by strictly selecting titanium wire. With super stable magnetic field and pure copper polar cap, it can reduce the generation of eddy current and improve the working efficiency to the highest level.
Three 9-inch bass with 5-inch titanium voice coil
Like the midrange unit mentioned earlier, the A5 loudspeaker uses three 9-inch subwoofers, all of which are made by the manufacturer. The sandwich cone vibrator with graphene, carbon fiber and very light new sandwich material is fully used to practice high rigidity / weight ratio. With the help of computer, the unit bracket can effectively counteract the resonance effect caused by the work, at the same time, it can allow more air flow to pass through and enhance the heat dissipation performance. 5-inch-diameter titanium voice coil with a large and stable magnetic field, even if the output sound pressure is at a very high level (115 DB!) It can still maintain very low distortion and inductance (0.18 MH). With the help of the final element analysis (FEA) measurement software, it can provide a sound, mechanical, electromagnetic and thermal performance evaluation platform for the Magico engineering team to produce such exquisite units.
The world's first fever speaker with Mundorf M-Resist Ultra resistor
The A5 loudspeaker adopts a three-way five unit passive sound separation system, which belongs to the fourth-order linkwitz riley-24db attenuation mode planning, and is intended to create a precise convergence and wide frequency response. In addition to the capacitors manufactured by mundorf, a German manufacturer of febrile supplements, which are sold at a considerable retail price, the parts that make up this set of splitter also have high-power, transparent and dynamic m-resist ultra high-power film resistors. According to the manufacturer, A5 loudspeaker will be the world's first pair of fever speakers using mundorf m-resist ultra high-power film resistors, which means its sound performance must be extraordinary.
Like other Magico products, each pair of A5 loudspeaker is manufactured and tested in the California plant to ensure product quality.
Magico A5 loudspeaker specification:
Retail price: HK $190000 per pair (about RMB 174000)
Design: 3-way 5-unit passive voice separation
Treble: 1-inch hemispherical beryllium unit
Baritone: 5-inch graphene nano Tec nano graphene vibrator unit
Bass: 3 × 9 "graphene nano Tec nano graphene vibrator unit
Frequency response: 22Hz – 50KHz
Input sensitivity: 88DB
Average impedance: 4 Ω
Recommended matching amplifier power: 50 – 1000W
Volume (H × w × d): 1137 × 267 × 378mm
Net weight of each: 82kg
Familiar 28mm hemispherical beryllium treble
Alon Wolf, the leader and designer of A series speakers, is obviously very dedicated to the unit decision. Let's see the development concept from the million yuan M series to the secret hemispherical treble in the field of 50KHz. The 28mm diaphragm is made of beryllium metal with excellent heat dissipation performance. The rubidium magnet circuit with special structure is also added with new damping materials, which fully meets the strict requirements of high pressure and low distortion regeneration.
Brand new 5 inch sandwich medium with foam material suspension
The A5 loudspeaker will not only create a wider sound diffusion, but also improve the transparency to another level of 5-inch midrange unit. The sandwich shaped vibrating basin formed by special manipulation is the same as the nano graphene GrapheneNano-Tec, which has a tensile strength of 50 times higher than that of carbon steel. As for the suspension part, it is converted to foam material production, which helps to enhance operational response and reduce distortion, so as to make the basin and suspension more ideal. The voice coil is made by strictly selecting titanium wire. With super stable magnetic field and pure copper polar cap, it can reduce the generation of eddy current and improve the working efficiency to the highest level.
Three 9-inch bass with 5-inch titanium voice coil
Like the midrange unit mentioned earlier, the A5 loudspeaker uses three 9-inch subwoofers, all of which are made by the manufacturer. The sandwich cone vibrator with graphene, carbon fiber and very light new sandwich material is fully used to practice high rigidity / weight ratio. With the help of computer, the unit bracket can effectively counteract the resonance effect caused by the work, at the same time, it can allow more air flow to pass through and enhance the heat dissipation performance. 5-inch-diameter titanium voice coil with a large and stable magnetic field, even if the output sound pressure is at a very high level (115 DB!) It can still maintain very low distortion and inductance (0.18 MH). With the help of the final element analysis (FEA) measurement software, it can provide a sound, mechanical, electromagnetic and thermal performance evaluation platform for the Magico engineering team to produce such exquisite units.
The world's first fever speaker with Mundorf M-Resist Ultra resistor
The A5 loudspeaker adopts a three-way five unit passive sound separation system, which belongs to the fourth-order linkwitz riley-24db attenuation mode planning, and is intended to create a precise convergence and wide frequency response. In addition to the capacitors manufactured by mundorf, a German manufacturer of febrile supplements, which are sold at a considerable retail price, the parts that make up this set of splitter also have high-power, transparent and dynamic m-resist ultra high-power film resistors. According to the manufacturer, A5 loudspeaker will be the world's first pair of fever speakers using mundorf m-resist ultra high-power film resistors, which means its sound performance must be extraordinary.
Like other Magico products, each pair of A5 loudspeaker is manufactured and tested in the California plant to ensure product quality.
Magico A5 loudspeaker specification:
Retail price: HK $190000 per pair (about RMB 174000)
Design: 3-way 5-unit passive voice separation
Treble: 1-inch hemispherical beryllium unit
Baritone: 5-inch graphene nano Tec nano graphene vibrator unit
Bass: 3 × 9 "graphene nano Tec nano graphene vibrator unit
Frequency response: 22Hz – 50KHz
Input sensitivity: 88DB
Average impedance: 4 Ω
Recommended matching amplifier power: 50 – 1000W
Volume (H × w × d): 1137 × 267 × 378mm
Net weight of each: 82kg
