Critical-Test-4446
New member
The number you'll see on boxes from 2027 is going to be 7.5 Mbps, and a lot of products wearing the Bluetooth 7.0 badge won't be able to do it. The Bluetooth SIG adopted High Data Throughput on November 4 as an optional part of the Core 7.0 spec. It's a new LE radio layer with five rates, but only 2, 3 and 4 Mbps are required. The 6 and 7.5 Mbps modes are optional, and all of those are raw physical-layer figures before protocol overhead.
Put that next to what audio actually needs. Plain 16-bit/44.1kHz stereo PCM is about 1.41 Mbps, and 24/96 is about 4.61 Mbps before overhead. So a device that only implements the mandatory rates can comfortably carry CD-quality lossless, while genuinely uncompressed hi-res needs the optional top end or a lossless codec on top. That's how we end up with two products that both say HDT and behave completely differently.
For this forum the interesting part is the TV end. Most TVs treat Bluetooth as an afterthought for headphones, and the usual complaint is lip sync, not fidelity. Nothing in the announcement talks about latency, and more throughput doesn't automatically mean less delay. Wireless rears on soundbars mostly run their own proprietary links anyway, so I wouldn't expect HDT to change those quickly.
Still, it's the first time the standard itself has made room for lossless instead of leaving it to aptX and LDAC trademarks. Just don't treat "7.0" as a spec until you know which rates the chip supports, and whether your TV ever gets a radio that speaks it.
Put that next to what audio actually needs. Plain 16-bit/44.1kHz stereo PCM is about 1.41 Mbps, and 24/96 is about 4.61 Mbps before overhead. So a device that only implements the mandatory rates can comfortably carry CD-quality lossless, while genuinely uncompressed hi-res needs the optional top end or a lossless codec on top. That's how we end up with two products that both say HDT and behave completely differently.
For this forum the interesting part is the TV end. Most TVs treat Bluetooth as an afterthought for headphones, and the usual complaint is lip sync, not fidelity. Nothing in the announcement talks about latency, and more throughput doesn't automatically mean less delay. Wireless rears on soundbars mostly run their own proprietary links anyway, so I wouldn't expect HDT to change those quickly.
Still, it's the first time the standard itself has made room for lossless instead of leaving it to aptX and LDAC trademarks. Just don't treat "7.0" as a spec until you know which rates the chip supports, and whether your TV ever gets a radio that speaks it.