14 HomeKit cameras live in one grid on the new Apple TV 4K, where older boxes froze

goalweiser

New member
If the HomeKit camera grid on your current Apple TV loads a couple of tiles, stutters and then gives up, that is apparently the thing the 2026 box fixes.

One owner on the 4th-generation Apple TV 4K is running UniFi Protect cameras through Scrypted into HomeKit, and the multi-camera grid now shows 14 cameras at once, all with live indicators. On earlier generations the same setup could reliably show one camera at a time, while opening the grid would load slowly, freeze or eventually crash.

This is a more useful upgrade story than most of what came out of launch week. The usual case for the new box has been Siri features and speed you mostly notice in menus. A camera grid is real decoding load: many simultaneous streams, each decoded and scaled into a tile. That is exactly where an old chip and limited memory run out, and it is a workload that people with a security setup actually use every day, often on the TV in the room they sit in.

Two things I would not read into it yet. It is one setup with Scrypted in the middle, and Scrypted can transcode or pass streams through depending on how it is configured, so stream resolution and bitrate decide a lot. Also, live indicators in the grid do not tell you the frame rate each tile is managing.

Still, for anyone with Protect or a similar NVR who has been leaning on a separate tablet as the camera wall, this is the first real reason I have seen to put the old Apple TV in a drawer. Anyone else running a big camera grid on the new box, and what resolution are your substreams set to?
 

mtn328

Member
Running eight Protect cameras through Scrypted here and the grid on my 2022 box was unusable. This is the post that just sold me.
 

Robert

Member
Grid view also works through HomeKit Secure Video without Scrypted, would be good to know if that path improved too.
 
Top