How to reset Hisense TV with No Picture

Cloud745

Member
This article will introduce the solution on how to reset Hisense TV no picture.

Why does Hisense TV have no picture?​



There are many reasons why your Smart TV is not outputting pictures. First, a software update may have failed or it may simply be a bug. Performing certain operations while using the TV may cause the display to go black. Sometimes it may also be caused by a hardware failure. But to determine the real cause, it is better to perform a factory reset. Only on this basis, it is possible to understand the nature of the problem. Therefore, please follow the below methods to solve how to restart Hisense Smart TV without pictures.

How to restet Hisense TV with No Picture.jpg

How to reset Hisense TV with No Picture?​


Since you can't tell if the problem is hardware or software just by looking at the TV screen, you'll need to do a factory reset. You can reset a Hisense Smart TV with no image in the following two ways.

Method 1: Reset Hisense TV with the reset button​


Most Hisense TVs also have a simple and small reset button, usually located on the back. It will appear in the section where you have TV input and output ports.

Reset Hisense TV with the reset button

There is a reset button on the back of the Hisense TV. To restart the Hisense TV, simply press and hold the reset button for about 15 seconds. The TV should restart automatically. This is when you leave the reset button. If you see an image on your TV, a reset can help fix it.

Method 2: Replug Hisense TV from the power source​

Replug Hisense TV from the power source

1. First, if you haven't turned off the TV, you need to turn it off.

2. Once this is done, you will need to disconnect all connected devices from the TV. The device in question can be any USB, set-top box, network cable, etc.

3. Now you need to disconnect the TV from the power supply.

4. Unplug the TV for at least 2 minutes.

5. This is a soft reset that you perform as it deletes everything currently present in the TV RAM.

6. When the time runs out, just connect the TV box to the power supply and turn it on.

7. If the problem is only with the software, the TV should return to normal display.

Method 3: Reset Hisense Roku TV with Remote Buttons​


If your Hisense Roku TV doesn't display an image, you can perform a reset using a simple and convenient button combination.
Reset Hisense Roku TV with Remote Buttons
1. First, you need to turn on the Hisense Roku TV. Use the remote to turn it on.

2. Now, use the remote control to press the up navigation key once.

3. You must press the rewind button twice.

4. Finally, click the "Forward" button twice.

5. Usually, if your TV is displaying an image, it will freeze for a while at first and then display a black screen.

6. The TV should restart automatically shortly thereafter.

7. In this case, if your TV can display the image normally after pressing the above button, the problem is solved.

Summary​

These are the three methods to reset on Hisense Smart TV. If none of these methods solve the problem, the best thing to do is to bring it to a service center and have it checked by an authorized person.

If you have any questions about installing and downloading apps on Hisense Smart TVs, you can leave a message in the comment section below.
 

Yihnd

Member
Under normal circumstances, to turn on the Hisense TV, you only need to insert the power plug into the power outlet, and then turn on the power switch on the TV body to turn on successfully.

If the TV indicator is on but no picture is displayed after turning on the power switch, the TV may be in standby mode. You can press the standby button on the remote control to wake up the TV and turn it on;

If the remote control cannot be turned on, you can try to wake up the TV by pressing the channel + button or the channel - button on the TV body.
 
Top